Our competition grade dog walks are fabricated from 1" welded steel tubing with 1/2" steel tubing trusses welded underneath so that there is virtually no flex in any of the planks, no matter how big your dog is. The fabricated steel frames are then sandblasted and powder coated in virtually any color you want. The dog walk skins are made of Poly Metal aluminum/plastic composite sheets and are painted with a premium exterior flat paint and textured with your choice of either sand or rubber. Our standard competition dog walk has 12' ramps and center section, and is 12" wide and 48" high. We can build your dog walk ramps with or without slats.
Our competition dog walk legs are designed so that they can be used at their regulation heights or easily lowered for training young dogs. This is a nice feature if your equipment is used by an agility club for training as well as trialing. A lowered dog walk is far less intimidating to a young dog and they will gain confidence going across the dog walk much quicker when it is introduced to them at the lower height. When lowered, our competition dog walks are approximately 24" high.
The dog walk is easily lowered by pulling one pin and rotating the legs down. To raise them again, simply rotate the legs back up and re-insert the pin. This is easily done by one person. By pulling another pin, the legs can be removed from the center section entirely for more compact storage.
You can also order your dog walk with or without wheels, on one or both sides. Our standard wheel is a 7" diameter steel wheel with rubber tire and sealed ball bearing rollers. We weld an axle to the dog walk leg and the wheel is then attached to the axle.
We offer our competition dog walks either unfinished or completely finished and ready to use, and at any stage in between. If you are handy with a can of spray paint and a paint roller, the cheapest way to get a competition grade dog walk is to order it unfinished and paint it yourself. Or if you're really handy, you can get the dog walk frame bare or powder coated (powder coating is far superior to spray paint) and put the skin on yourself to save some money.
Our competition grade dog walk prices are as follows:
| COMPONENT | PRICE |
| Unfinished dog walk, bare steel frame and unpainted Poly Metal skin, no slats or wheels (Add $180 for powder coated frame with unfinished skin) | $510 |
| Finished dog walk, powder coated steel frame and painted Poly Metal skin, sand texture, no slats or wheels | $790 |
| Add wheels | $25 each or 4 for $80 |
| Add AKC or USDAA regulation slats (to painted and sand texture surface) | $60 |
For rubber surfacing add $150 to the finished price above for non slatted equipment and add $210 for slatted equipment (AKC or USDAA regulation slats are included in the $210 rubber price) |
|
To see our paint and powder coating colors please go to our Colors page.
To see our granulated rubber colors please go to our Rubber Surfacing Page
For delivery rates please see our Delivery page.
